BASIL_NETWORKS


BANNER_TEXT_IBPD_System_Hardware

 

HomeABOUTPRODUCTSSERVICESSUPPORTCONTACTARTICLESBLOG
SystemsPeripheralsInstrumentsResearchNetworksSoftwareProgrammersOEM
IBPD-SystemIBPD-CAMSIBPD-HardwareIBPD-CLADSIBPD-ProtocolsIBPD-Test Equip
 
IBPD Model 100/110IBPD Model 200/400IBPD Model 210/220IBPD PTB-50IBPD PTB-3040IBPD Hdwr Specs

    BANNER_IBPD_SYSTEM_CONTROLLERS_SPECIFICATIONS

 

Product  Line  Features

Model
100

Model
110

Model
200

Model
400
(2)

Model
210

Model
220

Model
600

Model
800

Model
xxx

Model
xxx

Long Product Life Cycle WindowsXP-32 bit, Win7-32/64 bit, Win8.x-32/64, Win10-32/64

  On going development of new protocols, devices and accessories insures the longevity of the product line.
  Reduced TCO by offering additional protocols, devices & accessories at a fraction of the base cost.
  Universal platform for the IoT and embedded systems, add security to IoT device development.

YES YES YES YES YES YES YES N/A    

Software Tested on WindowsXP-32,  Win7-32/64,  Win8.x-32/64

  Multi-User from Local File Server or Cloud File Server, unlimited users, no additional licenses required.
  AES256 encryption user controlled for security and compartmentalization of projects.
  Create, open/modify projects identified by User & Computer Name for controlled access.

YES YES YES YES YES YES YES N/A    

Software Currently Being Tested on Red Hat Enterprise Linux  5.x 32/64

  Testing being scheduled for RHEL 6, Suse and Ubuntu Linux Operating Systems.

YES YES YES YES YES YES YES N/A    

Modular Connectivity - Run the IBPD System From TCP/IP, Wireless WiFi, USB

 USB - Single port connection - Internal active USB HUB connects other modules.
 USB connection tested with 50 ft. active USB extension for control room capability.
 WiFi wide band 802.11a,b,g,n, ac - WEP, WPA, WPA2, AES.
 TCP/IP Wired  - 802.1X Authentication, AES.
 AES-256 Security interface on all connectivity devices.

YES YES YES YES YES YES YES YES    

2 Standard - Universal Programmable Protocol Controllers (UPPC)

  Bit / Byte Controller with serial clock bit stream control to synchronize data with clock
  Data bit transfer programmable on Rising / Falling clock edges or Center of data bit
  Serial/Parallel Clock Speeds up to 4 MHz
  Supports hundreds of serial and serial-parallel type protocols

YES YES NO NO NO NO N/A N/A    

2  Advanced - Universal Programmable Protocol Controllers (UPPC)

  Bit / Byte Controller with serial clock bit stream control to synchronize data with clock
  Data bit transfer programmable on Rising / Falling clock edges or Center of data bit
  Serial/Parallel Clock Speeds up to 80MHz QSPI, SPI, etc IC's for product development and testing 
  Protocol Serial/Parallel Configurations development for QSPI, SPI, I²C, etc complex IC's
  Supports hundreds of serial and serial-parallel type protocols

NO NO YES

YES

YES YES N/A N/A    

I²C Protocol Controller IBPD System Software

  Allows Data Transfer To / From Slave Devices
 Also acts as a slave device From/To controllers

YES YES YES YES YES YES N/A N/A    

I²C Slave Device with IBPD Slave Software

  Allows Data Transfer To / From Controllers

YES YES

YES(1)

YES(1)

YES(1)

YES(1)

N/A N/A    

SPI Protocol Controller IBPD System Software

  Allows Data Transfer To / From Slave Devices
 Also acts as a slave device From/To controllers

YES YES YES YES YES YES N/A N/A    

SPI Slave Device with IBPD Slave Software

  Allows Data Transfer To / From Controllers

YES YES

YES(1)

YES(1)

YES(1)

YES(1)

N/A N/A    

Dual 16 bit Parallel Port Controls with IBPD Control Software

  16 Bit ports A & B are byte controlled for direct or BUS R/W I/O

YES YES YES YES YES YES N/A N/A    

8 bit CPU I/O Device Port with Three Device Selects with IBPD Software

  Typical Device I/O CPU type with three Device Select and separate Read/Write lines

YES YES YES YES YES YES N/A N/A    

4 Channels Differential 16 bit Analog inputs with IBPD Software

  ±2.048 Volts
  Gain x1, x2, x4, x8
  15 samples per second.

YES NO NO NO NO NO N/A N/A    

4 Channels 12 bit Analog Outputs with IBPD Software

  0-2.048 / 4.096 volts, programmable gain x1 / x2
  1024 samples per second, with software

YES NO NO NO NO NO N/A N/A    

A/D Analog Input 16 Bit Differential / Single Ended with IBPD Software

  ±10.240 Volts to ±9.7656 Millivolts full scale
  Gain x 1,  to 1024 programmable in 11 steps
  4 Meg x16 SRAM data input buffer each channel
  1 Meg samples per second maximum
  Each Channel is completely independent or may be synchronized to any or all channels
  32 bit programmable clock controlled sample rate timer per channel
  Digital input/output trigger control when to start sampling channels
  Up to 256 channels expansion  4 or 8 channel increments.

NO NO

YES(2)

YES(2)

NO NO N/A

YES

 

 

D/A Outputs 16 bit Differential / Single Ended with IBPD Software

  ±10.240 volts to ±0.640 volts Full Scale, programmable gain x1, x2, x4, x8, x16
  4 Meg x16 SRAM Internal D/A output memory buffer
  32 bit programmable clock controlled sample rate timer  per channel
  1 Meg samples per second, with software
  Each Channel is completely independent or may be synchronized to any or all channels
  32 bit programmable clock controlled sample rate timer per channel
  Digital input/output trigger control when to start sampling channels
  Up to 256 channels expansion  4 or 8 channel increments.

NO NO

YES(2)

YES(2)

NO NO N/A

YES

 

 

8 Channels RTD Platinum Temperature Channels with IBPD Software

  -200°C  to +850°C Standard Calibration Class A,B
  Standart RTD's Supported: Platinum, Nickel -(100,500,1000 ohm), Balco(Nickel-Iron)
  Calibration setup for each channel with Callendar-Van Dusen polynomial curve fit
  Sample Rate of 10 Samples/Second time stamped to user selected data file
  Digital input trigger control when to start sampling channels
  Up to 32 channels expansion  8 channel increments.
  This is a program control unbuffered interface
  Used for CJC of Thermocouple blocks using standard CJC Rack Panel Connectors

N/A N/A N/A N/A N/A N/A

YES

N/A

 

 

Universal Temperature Sensor Channel Block with IBPD Software

  Standard RTD's Supported: Platinum, Nickel -(100,500,1000 ohm), Balco(Nickel-Iron)
  Calibration setup for each channel with Callendar-Van Dusen polynomial curve fit
  Thermocouple with CJC setup for each channel with ITS-90 polynomials
  Thermocouple types B,E,J,K,N,R,S any combination per channel full range
  Separate calibrated references,  5Vdc@30 MA and a 1MA current source per channel
  Calibration setup for each channel with offset/range for accurate measurements
  2 Meg x 32 bit RAM buffer for temperature data measurement per channel
  24 bit sensor data and 8 bit sensor type per channel
  Programmable gains  x1, x2, x10, x50, x100, x200, x300, x500, x1000.
  0 ±2.5 volts DC maximum differential input range
  Sample Rates programmable  to 10K Samples/Second,  Start time stamped data file
  Each Channel is completely independent or may be synchronized to any or all channels
  32 bit programmable clock controlled sample rate timer per channel
  Digital input/output trigger control when to start sampling channels
  Up to 256 channels expansion  4 or 8 channel increments.

N/A N/A N/A N/A N/A N/A

YES(2)

N/A

 

 

16 Channel Logic Analyzer with IBPD-LAN Software

  1 Meg x16 bit post trigger buffer memory to hold sampled data
  128K x16 bit pre trigger buffer memory for pre-trigger sampled data
  32 selectable sample rates, 20ns sampling rate max
  2 external selectable user sample clock inputs (100MHz max)

NO YES NO NO YES NO N/A N/A    

2 Channel DSO (Digital Storage Oscilloscope) with IBPD-DSO Software

  8 bit vertical resolution each channel
  1 meg x8 storage buffer for each channel
  100 MHz, 10ns sampling simultaneously
  Vertical input gains x1, x2, x5, x10
  AC - DC coupled selectable
  External Trigger input
  +/- 10 Volts in AC/DC with x1 Probe setting
  +/- 100 Volts max with x10 probe setting

NO NO NO NO NO YES N/A N/A    

CLADS Command Line Argument Development System Software IP

 Create Command Line Argument Commands for any application that supports CLA options
 Create C Header file for user program implementation
 C language Command Line Parser to control CLA commands in user developed API's
 Create Shortcut Links
 Create and/or modify Intel®-Hex files from binary or ASCII files
 Reformat Intel® Hex files to 16, 32 byte data lengths
 Add special IBPD interface commands to  Intel� Hex files for user controlled functions 

YES YES YES YES YES YES YES YES YES YES

Standard C library for developing separate functions and custom drivers.

 Create Custom Command Line Arguments to access all IBPD functions

YES YES YES YES YES YES YES YES YES YES

Standard (8"x4.25"x1.5") plastic enclosure or Custom Metal Enclosure.

 Custom enclosures designed to users specifications available.  19" Rack Mount 1U,2U

YES YES YES YES YES YES YES YES YES YES

Standard push terminal interconnection set or custom interface connectors

 Custom interfaces to users test system are available - special connectors etc.

YES YES YES YES YES YES YES YES YES YES

Many other protocols negotiable and are on-going in development.

 The IBPD roadmap is on-going and is intended to address cost effective development
   needs to create  new products incorporating new technologies with a competitive edge.

YES YES YES YES YES YES YES YES YES YES
                     
                     

Notes:

(1)  - Requires COTS UMFT201XB for the I2C Slave, UMFT220XB for the SPI Slave.  The Software is part of the common IBPD System and will support multiple slaves and controllers.

(2)  - Model-200/400/800 requires external power sources for the Isolation power. Each section has a separated power connection in order to allow complete isolation.  All sources may be tied together for a single remote isolated power source.

 

Top

 
Copyright© 1990-2018 BASIL Networks, PLLC. All rights reserved
webmaster